Feature:

For M8~M16 screws and bolts, under head length less than 150mm

Available for 2~8 cameras

Flange nuts and rivets can be applied on this model

Optional: Laser detector to inspect thread presence

Optional: Rotating mechanism to inspect recess depth or broken pin

Optional: wheel crack checking system (LS-1501) for head crack inspection

Optional: bottom sorting system (LS-1503) for inspecting cutter presence

Optional: Bending checking module

Optional: 360° rotation module for thread damage inspection

Optional: two kinds of Eddy current systems:

 1. For head open crack inspection

 2. Material mix-up or with/without heat-treatment

Sorting items:

• Screw-head height, width • Recess depth • Pinhole Excess Material

• Ineffective thread length • Minor Thread Diameter • Feature Angle

• Major Thread Diameter • Pitch Distance • Feature No.

• Bevel Thread • Screw Length • Feature Similarity

• Cone Point • Zinc:Yes or No（Head Top View） • Feature Length

• Pinhole Alignment • Head Crack • AF/AC

• Head Mark • Roundness • Material Mix-up

• Inner Roundness • Inner Concentricity • Broken pin

• Inner Excess Material • Shorten AF • Deformed Thread

• Feature-Center Distance

Optional Function:

Bottom Sorting    

• 360° Thread Damage • Head Wheel Crack •Screw Bending (Multi-Images)

Specifications:

• Wire Diameter: φ8~16mm • Wire Diameter: φ8~16mm

• Length Under Head: 15~150mm • Sorting Precision: ±1 pixel

• Head Height: 2~25mm • Sorting Speed: 100~1000/PPM